Montana Colors - MTN Vinyl Coating - Peelable Spray Paint - 400ml
- The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable).
- Developed for the protection and customizing of objects.
- Weather-resistant.
- Can also give painted surfaces a grip-like tact due to its "soft touch" finish.
- Easy to apply.
- Excellent removability (Peelable).
- Good covering capability.
- Good flexibility.
- Finish "Soft Touch".
- To paint on metals, plastics, glass and most 2K paints.
- Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
- Apply to clean, dry and non-porous surfaces.
- We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned.
- Rinse with water and dry the surface.
- On painted surfaces it will only work if the paint previously applied was a flat, two-component or cured paint.
- When in doubt, do a test prior to use.
- Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
- After about 12 hours, the vinyl layer may be removed as if it were adhesive film.
- By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
- After use, turn the aerosol can upside down and purge the valve.
- If the nozzle becomes clogged, replace it with a new one.
- Do not apply to connected electronic devices and use in well-ventilated areas.
- For more information see the safety data sheet.
| Color | Reference | EAN13 |
| Black | EX014V9011 | 8427744153571 |
| Red | EX014V0150 | 8427744153588 |
| Aluminium Métallisé | EX014V0120 | 8427744153656 |
| Gris Métallisé | EX014V0121 | 8427744153663 |
| Noir Métallisé | EX014V0122 | 8427744153670 |
